Engine Details

Now that I have my engine and transmission installed in my car and fired up. I am so pleased with the entire process that I wanted to pass along my experience for others who are looking. I ordered my engine package from Al Beix at Western Canada Cobras. I wanted something that was completely turnkey, and basically ready to drop into the car. Working with Al, we came up with a power plant that fit my budget, was on target with what I wanted to use the car for, and was ready to install.

I am building the cobra mainly because I wanted the experience of building the car as a hobby, and to have a great looking vehicle to drive after. It will be a summer driver so I did not need a big block with more power than I knew what to do with. After many discussions, I decided to go with a 302/351. The estimated HP was 350-380, more than enough for what I wanted. I also got the chance to pick what parts I wanted in the engine, and got great advice from Al on this.

The engine was built at Fortin’s engine shop for Western Canada Cobra, and me! The builder and shop Foreman, Norm, has been great. He has answered all my questions, some intelligent questions, some really not intelligent, but he knows his stuff and got me on my way. I also wanted a Transmission, bell housing, clutch etc and Al worked with me so that all these parts were installed/connected when it was delivered. The engine and transmission arrived in a big crate which I shipped back to them. It was all bolted together just like they promised and I literally picked it up off the crate, added engine mounts and dropped it in.

The engine sounds awesome, looks awesome and runs really smooth. Here is a first start link so you can check it out. https://rmcmicki.wordpress.com/2014/03/30/first-engine-start/

Some stats on the engine

Block is a factory 5.0 roller block, oven cleaned and shot peened, lined bore // rough bore and squared decked in a Rottler 68a C&C machine
The block was torqued plate honed in our Rottler HP7A honing machine
The crank is a cast steel index ground and micro polished
Cam shaft is a custom ground for Fortin’s Engines only, timing chain is SA double roller
All internals are precision balanced
Heads are aluminum Edelbrock, taken apart and give them an extra tune up the Fortin’s way
Con rods are new Eagle I beam
Pistons are Probe forged flat top pistons, rings are Perfect Circle
Flywheel and balancer, timing cover are all new parts
Fastener are ARP; main studs,head bolts,crank bolt
All engine bearings are Clevite; mains, rods, cam bearings
Cobra valve covers
Holley 670 CFM carb with electric choke and vacuum secondary’s
Performance Distributor
Holley external electric fuel pump
Chrome one wire Alternator
Mach pulley set
The Transmission is a Tremtec T5.

The engine dyno’d at just over 360 HP at 6300 RPM and has a really nice torque line, never dropping below 300 ftlbs from 3200 to 6300 RPM.

For those of you that live in Canada, or even the Pacific Northwest, I would strongly put these guys on your list to contact when you need a complete engine.


One thought on “Engine Details

  1. Pingback: Engine Recommendation in Pacific Northwest - FFCars.com : Factory Five Racing Discussion Forum

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s